新闻动态
 怎么安全操作箱式电炉?

箱式电炉是做高温热处理实验不可或缺的设备,广泛用于各个企事业单位及大学院校,那么您知道该如何来安全操作箱式电炉吗?下面就让小编来告诉您吧。
Box-type furnace is an indispensable equipment for high temperature heat treatment experiment. It is widely used in various enterprises, institutions and universities. Do you know how to operate box-type furnace safely? Now let Xiaobian tell you.
1、通电前,先检查接线有否符合,控制器上等接线螺丝有否松落现象。
1. Before switching on, check whether the wiring is in conformity and whether the upper connection screw of the controller is loose.
2、称好试样放与炉内,并关闭炉门,打开电炉开关。
2. Weighing the sample and putting it in the furnace, closing the door of the furnace and opening the switch of the furnace.
3、将控制器上的开关拔至“设定”位置,设定试验温度。
3. Pull the switch on the controller to the "set" position and set the test temperature.
4、设定完成后开关拔回至“测量”位置,电炉开始升温工作,此时仪表由绿指示灯显示。
4. After setting, the switch is pulled back to the "measuring" position and the furnace starts to heat up. At this time, the instrument is displayed by the green indicator.
5、工作时间到后关掉电炉开关,待冷却后取出样品。
5. Turn off the electric furnace switch after working hours, and take out the sample after cooling.
6、装取试样时一定要切断电源,以防触电。
6. When loading the sample, the power supply must be cut off to prevent electric shock.
7、装取试样时要戴专用手套,以防烫伤。
7. Special gloves should be worn when loading samples to prevent scalding.
8、使用时切勿超过电阻炉的最高温度。
8. Do not exceed the highest temperature of resistance furnace when using.

山东电炉
10、装取试样时炉门开启时间应尽量短,以延长电炉使用寿命。
10. When loading samples, the opening time of furnace door should be as short as possible to prolong the service life of electric furnace.
11、不得将沾有水和油的试样放入炉膛;不得用沾有水和油的夹子装取试样。
11. Samples contaminated with water and oil shall not be put into the furnace. Samples shall not be loaded with clamps contaminated with water and oil.
12、禁止向炉膛内灌注任何液体。
12. It is forbidden to pour any liquid into the furnace.
13、不得随便触摸电炉及周围的试样。
13. Do not touch the furnace or the surrounding samples.
14、试样应放在炉膛中间,整齐放好,切勿乱放。
14. Samples should be placed in the middle of the furnace. They should be placed neatly and not in disorder.
15、使用完毕后应切断电源、水源。
15. Power supply and water source should be cut off after use.
16、未经管理人员许可,不得操作电阻炉,严格按照设备的操作规程进行操作。
16. Resistance furnaces shall not be operated without the permission of management personnel, and shall be operated in strict accordance with the operating rules of the equipment.
今天的内容就先为大家介绍到这里了,如果您有山东电炉的其它疑问,欢迎您点击我们的官网进行咨询:http://www.jinandianlu.com/
Today's content is introduced here. If you have other questions about Shandong Electric Furnace, you are welcome to click on our official website for consultation: http://www.jinandianlu.com./

 
必威 版权所有(C)2014   网络支持   股票代码: 002095 著作权声明 网站管理